We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
So use
them at your own risk. If you find a wrong part number please let us know.
Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same
as a 1967....... Part numbers starting with a "V" are Vic,s part
numbers..1800vw@mail.com.. We will
put VW
part numbers in place as they are available.
1-- #VLSA...Axle S.A. Left side... 26 5/8" long...up to 1966---------
1-- #VRSA...Axle S.A. Right side...26 5/8" long...up to 1966-------
1-- #VLLA...Axle S.A. Left side...28 3/8" long...1966 -1968--------
1-- #VRLA...Axle S.A. Right side...28 3/8" long...1966 - 1968----
1-- #111 501 201A --- Axel L or R 1949-66
1-- #311 501 201D --- Axel L or R 1967-68
2-- #____...Axle Tube Assy...Rt side for short axle...up to 1966---
2-- #____...Axle Tube Assy...Left side for short axle...up to 1966-
2-- #____...Axle Tube Assy...Rt side for long axle...1966 - 1968--
2-- #____...Axle Tube Assy...Left side for long axle..1966 - 1968-
3--...Gaskets for setting end play included in gasket set #111 398 005A
4-- #_______...Axle Tube Retainer Flange "Stock stamped steel"
5-- #113 501 159...Large boot clamp---------------------------------------
6-- #111 501 153B...S.A. Boot...w/clamps... stock black---------------------------
6-- #111 598 021A...S.A. Boot Kit... w/clamps...German------------------------------
6-- #V009974...S.A. Boot...(set of 4)-------------------------------
7-- #111 501 159B...Small boot clamp-----------------------------------
8-- #311 501 191U..Rubber bumper stop-------------------------------
9-- #VSWP______...Taper Pin---------------------------------------------
10-- #311 501 169B...Outer Axle Tube bearing casting w/shock mount--
11-- #311 598 051...Gasket Kit also includes #14, #16, #19
12-- #VASS................Axle spacer...OD=1.690" / ID=1.185" / .255" thick & inside radius goes in
13-- #311 501 283...Bearing
14-- #113 501 291A..."O" ring seal...OD=2 7/8" x .105"
15-- #............................Spacer (not used)
16-- #111 501 296..."O" ring seal...OD=1.225" x .135" between bearing & Spacer
17-- #VSAS..............Spacer...OD=1.750" / ID=2.185" / .555" to .610" thick & outside bevel goes
out.
and the outside diameter must be perfectly smooth for seal to last.
18-- #113 501 315...Seal ( also comes in kit #311 598 051 ) open
side towards trany.
19-- #.............Shim...OD=1.750" / ID=1.180" & .020" thick (in Kit #311 598 051)
20-- #V1015...Set of 4 bolts (10 x 1.5 x 40mm or 1 1/8" long )
21-- #VRBC...Bearing Cap (Several different ones used - Match depth to old one)
22-- #113 501 615K... 4-lug brake drum 8/67-on
23-- #111 501 221...Axel nut (non-flanged) use 36mm socket & torque to 245 ft
lbs.
........#AC000141...36mm Socket with 1/2" drive *check*
24-- #N12 548 1.......Cotter Key 1 1/8" to 2 1/5" long and
approximate .190 dia.
25-- #113 501 615D..Brake Drum... 5-Lug. 57 - 7/67
26-- #V104015HB... 10x40x1.5mm...Hex bolt but with small head needed for
clearance.
27-- #VTCO...............Spring plate cap
27-- #V511101..........Spring Plate Caps (set of 2 ) Chrome
27-- #113 511 227A --- Cap w/o hole L or R 1960-69 & 1949-52
28-- #V510001..........Spring Plate Grommet 50-67 outer knobby.. 1 7/8"ID
28-- ...........................Spring Plate Grommet ..........outer
round.....
29-- #V510001..........Spring Plate Grommet...inner knobby...1 7/8"ID
29-- #311 598 245 --- Spring Plate Grommets (set of 4) 1960-68
30-- #VUSP...............Spring Plate
30-- #111 511 205B --- Spring Plate, L or R --- 1960-68
31-- #VTBS................Torsion Bar 21 3/4" long 60-68
32-- #VSWT...............Torsion Housing cut from S.A. Pan
Note: We
recommend always using the IRS torsion housing when building a car
then you can use S.A. or IRS
transmission.
33-- #V128015HB...Shock bolt 12x80x1.5mm or 12mm x 3 1/8" long
34-- #113 513 031G...Shock Rear Stock 1/54 - 7/68
34-- #KG5529..............Shock Rear Gas KYB
35-- #V1215N...............Nut for Shock 12mm
35-- #V1215NL............. Nylock 12mm Self locking nut
Spring Plate Stops-->*ck --- Swing Axle Transmission Parts Page-->*Click
Spring Plate Retainers...Chrome-->*ck
S.A. Tips-->*Click --- R-Suspension-->*Click ---
IRS Parts-->*Click
Go Back
<--
Good reason to use Spring Plate Retainers
Victor Comp. Products Inc. **--Vic's--**
Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US