Go Back
Start
Page
Parts
Book
Photos & #
Page
Links
Suspension Tips
Suspension Info.
*Stub Axles
*Trailing Arm Beef
up Kits
|
We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So
use them at your own risk. If you find a wrong part number please let us know.
Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the
same as a 1967....... Part numbers starting with a "V" are Vic,s part
numbers..1800vw@mail.com.. We
will put VW part numbers in place as they are available.
1-- #VTBL.... Torsion Bar--68-70 IRS--22mm--22 9/16" long ----------------
1-- #VTBL... *....."........."...--60-68 SA--21 3/4" long------------------------------
1-- #VTBL....*....."........."...--49-59 SA--24 11/16 long----------------------------
Note: Rt & Left Do not switch sides--Can use 21 3/4" bars in IRS with special spring
plates.
For more information on Spring Plates and how to adjust
them -> *Click
2-- #V510001..* Spring Plate Grommet--68-79--IRS Inner Knobby--1 7/8" I.D.----
2-- #V510002...*....."........."..........".......--59-60--S.A. inner round--1 7/8"I.D.---
2-- #V510001...*....."........."..........".......--61-67--S.A. inner knobby--1 7/8" I.D.---
2-- #111 598 245E --- Spring Plate Grommets -- 69-79 (Set of 4)
3-- #VSSP...Spring Plate (single plate)--IRS----------------------------------------------
3-- #VDSP...Spring Plate (dual plate)--IRS------------------------------------------------
3-- #VUSP......."........."....60-67--S.A.-------------------------------------------------------
3-- #V4959......."........."....49-59--S.A.--(use w/24 11/16" bars)----------------------
4-- #V510002...*Spring Plate Grommet--68-79--IRS Outer Round--1 7/8" ID>---
4-- #V510001...*...."........."..........".......--50-60--S.A. outer knobby--1 7/8" I.D.---
4-- #V510001...*...."........."..........".......--61-67--S.A. outer knobby-- 1 7/8" I.D.---
4-- #V510003...*Spring Plate Grommet for Adj. spring plates inside-- 2" I.D.--
5-- ......................Spring Plate Caps 68-79--------------------------------------------
5-- #V009569...*........"........."........."...............Dual or single plate Chrome Caps-------
6-- #VTAB...Trailing Arm Pivot Bolt (14x1.5mm threads) 87ft
lbs.--------(click for Tip)
7--#VUSW...Trailing Arm Bolt Washer--------------------------------------------------------
7-- ......................."........"......".........".......quantity & location is used to set toe-in--
8-- ##211 501 121...Trailing Arm Pivot Bushings (2-rubber & 2-Steel)--------------------
8-- #V530020...*............"........."........"...........".......Aftermarket
Urethane H.D.----------------
....................Trailing Arm are also called Control Arm = Same thing...............
.........................We have a Special Jig to Check if straight
or bent.................................
9-- #113 501 504G...#VRTA...Trailing Arm--68-79 RT--(__for single plate)-------------------
9-- #113 501 503G...#VLRT...Trailing Arm--68-79 Left--(__for ingle plate)-------------------
......Note: There are two different bolt patterns. One for single plate and a different pattern for the
......Dual plates. They are not
interchangeable. ck
10-- #311 501 191...*#V511110...Control Arm Rubber stop------------------------------
11-- #VRS...Inner Axle spacer (Seal I.D. contacts )----------------------------
.......1.750" O.D. x 1.184" I.D. x .394" thick
12-- #113 501 315G...Inner Axel seal-------------------------------------------------------------------
13-- #VTASR...Control Arm inner snap ring ( behind seal )-----------------
14-- #113 501 283...Inner Control Arm Axle bearing "Ball Bearing"-------------------------
15-- #VBS19...Axle Spacer between Bearings--------------------------------
.......2.240" x 1.5" O.D. x 1.190" I.D. hardened
16-- #V113609...Plastic Emergency Brake cable holder "snaps in"------
17-- #113 501 277A...Outer Control Arm Axel Bearing "Roller"--------------------------------
18-- #311 598 051...Large "O" ring ( Part of Seal Kit )------------------------------------------
19-- #..........................Small "O" ring ( Part of seal Kit )------------------------------------------
20-- #VRBC...Bearing Cap ( several different ones ck bearing depth in cap )--
21-- #VRSS...Outer Axel Spacer ( Seal contacts outer surface )----------
.......1.750" O.D x 1.184" I.D. - .475" thick
22-- #113 501 315G...Outer Axle Seal---(also in seal kit #311 598 051 )--------------------
23-- #V1015...Bearing Cap Bolts-10x30-1.5mm--- ( 4 )---torque to 43 ft lbs. "14mm head"
23a-- #N12 228 2...8mm Spring Washer...
23b-- #N11 558 1...8mm Flat Washer...
24-- #113 501 615J...Rear IRS brake drum 4-hole-------------------------------------------------
25-- #311 501 221...Rear Axle Nut ( use 36mm socket or 1 7/16" socket ) 24x1.5mm
.......Torque to 217'# / 255 ft lbs.
recheck in 500 miles
26-- -#N125481...Cotter Key Large--------------------------------------------------------------
27-- #V128015HB...Upper Shock Bolt---12x80-1.5mm--3 1/8"-- with 17mm head-
27a-- #V1215NL...Nylock 12-1.5mm self locking nut...
28-- #113 513 031N...Rear IRS Shock -------------------------------------------------------------
....... #KG5529...*KYB Gas Shock 47-79--------------------------------------------------------
29-- #127015HB...Lower Shock Bolt-----12x70-1.5mm--2 3/4" long --17mm head --
29a-- #V1215NL...Nylock 12-1.5mm self locking nut...
30-- #VAXELT1...Rear Axle 16 3/8" long Recycled ( for standard Transmission )-----------------
30-- #113 501 211...Rear Axel 16.358" or 415.50mm long (New)
......Other lengths used on the Bug are 16 3/16" & 18 3/4"
(I think these were for Auto-Tan Bugs) Let me
know if this is correct.
31-- #113 501 229D...CV Bolt ( Special 8x46mm ) (6) / CV--------------------------------
31a-- #113 501 229C...CV Bolt...8mm Allen...not always available, used on T2
31b-- #N15 371 1...CV Bolt Washer...Special Hard Locking-(6) / CV
-Torque to 25 ft lbs
32-- #VCUP...CV bolt Plate (3) / CV ----------------------------------------------
33-- #113 501 149...CV Axle Boot with Flange----------------------------------------------------
33-- #321 498 201A...CV Boot Kit ( German w/bolts & grease )----------------------------
34--Washer ( cupped spring washer ) remove if present "Do not
use"--
35-- #113 501 331D...CV "Constant Velocity Joint" -----------------------------------------------
35a-- #_________ CV Grease 3.2oz of molybdenum grease per joint.
36-- #113 517 279...CV axle circlip (2) / Axle -----------------------------------------------------
37-- #VUSA...Stub Axle---------Stub Axles---
37a- #VUSAA...Stub Axle Kit (Stub Axle/2-bearings/3-spacers/Nut -------*ck
38--Grease cup used in some CVs--------------------------------------------
39--CV large clamp------------------------------------------------------------------
40--Old type CV Boot without flange--------------------------------------------
41--Small CV boot clamp ( We don't recommended using this clamp )---
Swing
Axle-->*Click Rear Suspension-->*Click
S.A. Transmission-->*Click
Go Back
Victor Comp. Products Inc. **--Vic's--**
Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US
|