We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
So use
them at your own risk. If you find a wrong part number please let us know.
Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as
a 1967....... Part numbers starting with a "V" are Vic,s part numbers..1800vw@mail.com..
We will put VW part
numbers in place as they are available.
"Not Shown"-- #129015HB...4-bolts that bolt Front End to pan.
12mm x 90mm x 1.5mm bolts
1-- #111 405 691...Grease Dust cap... Right (2.065"OD without spedo drive
hole)...54-7/65...
1-- #111 405 692........"..........."......".......Left side (2.065"OD w/spedo. drive hole)...
2-- #111 405 671...Spindle Nut...Right hand
threads...54-7/65...requires (2)...
2-- #111 405 672.........".........".....Left hand threads...54-7/65...requires (2)...
3-- #111 405 681...Lock plate...54-7/65...
4-- #111 405 671...Spindle Nut...Right hand threads...54-7/65...requires (2)...
4-- #111 405 672.........".........".....Left hand threads...54-7/65...requires (2)...
5-- #111 405 661...Spindle nut thrust washer...54-7/65...
6-- #111 405 627...Outer Taper Roller Bearing...ID=.790"xOD=2.047"x.650"
6-- #111 405 645A...Outer Ball Bearing...Note: inner & Outer must be the same
type...
7-- #113 405 615A...Brake Drum (5 Hole)...1/54-7/65...
8-- #111 405 625A...Ball Bearing Inner to Ch. 115 999 000...1/54-7/65...
8-- #111 405 625......Roller Bearing Inner...ID=.985"xOD=2.440"x.750"
9-- #111 405 641A...Oil Seal to Ch. 115 999 000...40x62x11.5mm
10-- #VSPU...Inner Spacer that Seal rides on...
11-- #111 405 301...Spindle Left Side...
11-- #111 405 302...Spindle Right Side...
12-- #..........................Small Pin that holds spacer in Place...
12a-- #VKPS..Steel Spacer...(hard to find)...
13-- #111 498 021...King Pin Rebuild Kit (for both sides)...1/54-7/65...(2 lbs)
....................................Requires Special Reamer to install...
Note: When replacing the KP's, the LP's # 14 will normally need
replacing.
13-- #211 498 041A...Link Pin Set...(1 set required per vehicle)
14-- #111 498 051...Link Pin Kit...adj. with
enclosed shims...1/54-7/65...(3 lbs)
14-- #211 498 041A...Link Pin Set...(1 set required per vehicle) T2
64-67
14-- #211 405 356...T2 64-67 King Pin w/lower Link Pin Bushings L or R
14-- #211 405 317B...T2 62-67 King Pin Bushings Lower 62-67
15-- #111 405 351...Link...Left Side...
15-- #111 405 352...Link...Right Side...
16-- #N18 515 1...Grease Zerk fittings...6mm Straight...
16-- #N18 523 1...Grease Zerk 6mm...45 degree...
16-- #N18 516 1...Grease Zerk 8mm... used on some King Pin ft beams...
17-- #111 405 105D...Torsion Arm...Top...
18-- #111 405 151C...Torsion Arm...Lower...
19a-- #111 411 151...Torsion Bar Screw...
19-- #111 411 151...Torsion Bar Screw Lock Nut...
20-- #111 413 403A...Top Shock Bolt. Early type had step w/taper
lock. Not available ??
20-- #111 413 403A...Top Shock Bolt.. Straight 12-1.75-65mm...
21-- #113 413 031B...Shock Absorber to Ch. 115 999 000...
21-- #KG4521...KYB HD Shock...
21-- #V513 001...Coil Over Shock...adjustable...
22-- #111 401 273...Rubber Stop...
22-- #V413 103...After Market HD Stop (Sold in Pr's)...
23-- #V1015N...10x1.5...Nut for lower Shock...or V1015NL...Locking Nut...
24-- #111 411 027...Torsion Bars Top or Bottom...
25-- #111 401 315...Fiber/Bakelite Bushing... 1.770" O.D. x 1.455"
I.D.
T1 49-64 & Ghia 56-64
25-- #111 401 301...Needle Bearing...Outer... 1.812" O.D. x 1.455"
I.D."
25-- #V413 109...Outer Replacement for Stock Fiber Bushings... 1.770"
O.D. x 1.455" I.D.
25-- #V104 246...Outer Replacement for Stock Needle Bearings... 1.812"
O.D. x 1.455" I.D.
....................Front End Bushings -> Question w/Answer
->*Click
26-- #111 411 027...Torsion Bars Top or Bottom...Same as #24...
27-- #111 400 025...Axle Beam...Bare w/8 Bearings...
27-- #V401 001...Aluminum Front End w/Shock Towers...
27-- #V401 000...Aluminum Front End (No Shock Towers)...
..................Front End Bushings -> Question w/Answer
->*Click
28-- #N18 515 1...Grease Zerk 6mm Fitting (4) per car...
28-- #N18 516 1...Grease Zerk 8mm...used on some K.P. Beams...
28-- #N 018 516 1-2 Grease Nipple 8 x 1 mm
28-- #N 018 530 1-2 Grease Nipple 10 x 1 mm
29-- #111 401 315...Fiber/Bakelite Bushing...See #25...
....................Front End Bushings ->
Question w/Answer
->*Click
30-- #113 405 615A...Brake Drum (5 Hole)...1/54-7/65...
30-- #111 405 615B...Brake Drum (4 Hole)... 8/67-12/77...
31-- #131 405 641A...Oil Seal Fr. Ch. 116 000 001 to 118 857 239...
31-- #111 405 641B...Oil Seal Fr. Ch. 118 857 240...1/68-8/79...40x62x11.5mm
32-- #113 405 311E...Left Spindle...Shoe Brake...
32-- #113 405 312E...Right Spindle. Shoe Brake...
33-- #111 405 131...Upper Seal...(2) required...
33-- #131 405 131...Upper Seals...Some parts books give this number...
34-- #131 405 129...Lower Seal...(2) Right and Left side...
35-- #VOBJT... Top Outer Bearings...1.___ O.D. x 1.455"
I.D.
35-- #111 401 315... Top Inner Bushings... 1.770" O.D. x 1.455" I.D.
35-- #AC413110......Urethane Bushing Kit (outer 4 only)...The outer ones are normally the
only ones that go bad...........Front End Bushings -> Question w/Answer
->*Click
36-- #VOBJB...Lower Outer Bearing...1.___ O.D. x 1.690" I.D.
36-- # 111 401 315...Inner Bushing... 1.770" O.D. x 1.455"
ID.
37-- #131 411 107A...Torsion Leaf Set...
38-- #131 411 107A...Torsion Leaf Set...
39-- #113 401 021D...BJ Front Axle Beam w/Bearings...
39A--#113 401 021AK...BJ Beam Repair Kit (not shown) repairs the area
between the upper & lower
tubes... T1 66-78 & Ghia 66-74 "One set does one side" welding required.
40-- #111 411 151...Torsion Bar Grub Screw...49-79 T1,2,3 &
Thing
41-- #111 411 151...Torsion Bar Grub Screw Lock Nut...
42-- #131 498 441...Shock Extension Bolt Kit...Required on Early stock Shock...
43-- #113 413 031E...Shock Absorber Fr CH. 116 000 001...8/65-12/77...
43-- #113 413 031EU...Shock Does not require Bolt Kit...
43-- #V413 001...........Coil Over Adjustable Shock...
43-- #V413 006...........Ft Shock for Lowered Ft. Ends...
44-- #............................Shock Nut Lower BJ...
44-- #............................Shock Self Locking Nut...Nylock...
45-- #131 405 361F...Ball Joint Upper... Question w/Answer Removing Ball Joints ->*Click
46-- #131 405 319...Camber Adjuster...Mark
location before removing...
47-- #411 513 481...Nut-12mm Self-Locking...Ball Joint...
48-- #411 513 481... Nut-12mm...Same as #47...
49-- #113 405 311E...Spindle Left Side...8/65-78...
49-- #113 405 312E...Spindle Right Side...8/65-78...
50-- #131 405 151A...Torsion Arm Lower Left...8/65-12/77Q&A Removing Ball Joints ->*Click
50-- #131 405 152A...Torsion Arm Lower Right...8/65-12/77...*Reconditioned Arms sold exchange
51-- #131 405 103A...Torsion Arm Upper Left...8/65-12/77... Q&A Removing Ball
Joints ->*Click
51-- #131 405 104A...Torsion Arm Upper Right...8/65-12/77...*Reconditioned Arms sold exchange
52-- #111 411 151...Torsion Bar Screw...
52a-- #111 411 151...Torsion Bar Screw Lock Nut...
53-- #N18 515 1...Grease Zerk fittings...6mm Straight...Most BJ ft ends...
54-- #131 405 371G...Boll Joint Lower...66-on... Q&A Removing Ball Joints ->*Click
55-- #131 411 309...Stabilizer Bar, Front 66-79 Std.
56-- #111 498 101A...Stabilizer Mounting Kit..Fr. Ch. 116 000 001...
57-- #113 609 139...Ft. KP Backing Plate...52-58...
57-- #113 609 139A...Ft. KP Backing Plate...57-64...
57-- #V609 139.........Backing Plate Left... BJ Shoe Brakes...
57-- #.............................Backing Plate Left...BJ Disc Brakes...
57-- #.............................Backing Plate Right...BJ Disc Brakes...
58-- #.............................Backing Plate Bolt...
59-- #311 405 641A...Oil Seal Disc Brake...8/66-5/68...1.400"IDx2.060"ODx.250"
59-- #311 405 641B...Seal Disc Brakes Only Fr. Ch. 118 857 240...6/68-7/77...
1.500"IDx2.055"ODx.340"
60-- #311 405 625...Taper Roller Bearing Inner...8/65-6/68...
60-- #311 405 625D...Taper Roller Bearing Inner...6/68-12/77...
61-- #...........................Brake Rotor BJ ...
62-- #311 405 645...Taper Roller Bearing Outer...8/65-12/77....689"IDx1.571"ODx.580"
63-- #311 405 661...Thrust washer...8/65-12/77...
64-- #131 405 669...Locking Nut...Left side...
64-- #131 405 670...Locking Nut...Right Side...
65-- #131 405 691...Spindle Cap Left Side......1.900"ID w/speedometer drive Hole
65-- #131 405 692...Spindle Grease & Dust Cap..1.900"ID Right Side
66-- #V412 006...Stock Super Beetle Springs...Set of 2 .... ck
66-- #V412 005...Hi-Perf Super Beetle Springs...Set of 2 ...
66-- #V412 004...Lowered Strut Springs...Set of 2...
67a-- #113 412 303... SB Strut Stop ...up to 7/73...
67a-- #113 412 303A...Strut Upper Stop...SB up to 73...
67a-- #133 412 303A...Strut Upper Stop...SB 74-On...
67-- #V266 102A...Strut Assembly...recycled 3-bolt 8/70-73
67-- #V266 103A...Strut Assembly...recycled press in 73-79
67-- #V412 000...Lowered Strut Super Beetle 71-73...pr...
67-- #V412 001...Lowered Strut Super Beetle 74-79...pr...
67-- #113 412 031D...Strut Insert Fr. Ch 133 3003 656...8/70-7/73...3-Bolt...
67-- #133 412 031B...Strut Insert Fr.Ch 133 3003 656...8/73-8/79...Clamp...
67-- #V412 002...Lowered Strut Insert Super Beetle 71-73...pr..
67-- #V412 003...Lowered Strut Insert Super Beetle 74-79...pr..
68-- #113 407 361E...Ball Joint Super Beetle...8/70-7/73...3-Bolt...
68-- #133 407 361...Ball Joint Super Beetle..8/73-8/79...Clamp...
69-- #VTARM...Track Arm Forged Steel...8/70-7/73...recycled
69-- #VTR74...Track Arm Stamped Steel Welded...8/73-8/79...recycled
70-- #..........................Self Locking Nut...
71-- #113 407 311E...Spindle...Left...3-Bolt...8/70-7/73...recycled
71-- #113 407 312E..Spindle...Right... 3-Bolt...8/70-7/73...recycled
71-- #VLSBSK...Spindle...Left...8/73-8/79...
71-- #VRSBSK...Spindle...Right...Clamp Type...8/73-8/79...
72-- #...........................Backing Plate Left Side...
72-- #...........................Backing Plate Right Side...
73-- #...........................Backing Plate Bolt...
74-- #311 405 641A...Oil Seal (For Disc Brakes)...8/66-5/68...1.400"IDx2.060"ODx.250"
74-- #311 405 641B...Seal Disc. Brakes Fr. Ch 118 857 240...6/68-7/77...
75-- #311 405 625D...Taper Roller Bearing Inner Ch 118 857 240...6/68-12/77...
76-- #113 405 615D...Brake Drum...SB 70-7/72
76-- #113 405 615H...Brake Drum...SB 89/72-on
77-- #311 405 645...Taper Roller Bearing Outer ...8/65-12/77....689"IDx1.571"ODx..580"
78-- #311 405 661...Thrust Washer...8/65-12/77...
79-- #131 405 669...Spindle Locking Nut...Left Side...66-79...
79-- #131 405 670......."............"............".... Right Side...66-79...
80-- #131 405 691...Dust Cap Left Side with spedo. cable drive
hole...1.900"ID
80-- #131 405 692...Dust Cap Right Side........1.900"ID
Question w/Answer Setting the Toe In ->*Click........Front End Bushings -> Question w/Answer*Click
Tie Rods & Steering-->*Click ----
Brake Lines Parts Page ->*Click
Go Back
Victor Comp. Products Inc. **--Vic's--**
Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US